Freephone : 0800 000 488 Email: Info@getelectronic.co.nz Address: Unit 4/ 242 Ferry Road Waltham Christchurch



Multiplexer serial expansion IO board TCA9548A PD548A

Regular price $15.00

You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your when you realize "Uh oh, this chip has a fixed I2C address, and from what I know about I2C, you cannot have two devices with the same address on the same SDA/SCL pins!" Are you out of luck? You would be, if you didn't have this ultra-cool CJMCU-9548 1-to-8 I2C multiplexer!
Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller - this multiplexer acts as a gatekeeper, shuttling the commands to the selected set of I2C pins with your command.
Using it is fairly straight-forward: the multiplexer itself is on I2C address 0x70 (but can be adjusted from 0x70 to 0x77) and you simply write a single byte with the desired multiplexed output number to that port, and bam - any future I2C packets will get sent to that port. In theory, you could have 8 of these multiplexers on each of 0x70-0x77 addresses in order to control 64 of the same-I2C-addressed-part.

Specification:
Interface: I2C IIC
Chip: TCA9548A
Selectable I2C address: 0x70-0x77
Working Voltage: 1.65 -5.5V
Max Clock Frequency: 400KHz