|
Performance of Scope |
|
|
B Bandwidth (-3dB) |
50MHz |
|
Sampling Rate |
Max. real time sampling rate 200MSa/s |
|
Channel |
1 |
|
Coupling |
AC, DC |
|
Rise Time |
≤ 7.6ns |
|
Input Impedance |
1MΩ |
|
Max Input Voltage |
1x CAT III 300 VAC 10x, 100x CAT III 600 VAC |
|
Vertical Resolution |
8 bit |
|
Vertical Sensitivity |
10mV/div - 5V/div |
|
Horizontal Resolution |
2ns/div |
|
Horizontal Sensitivity |
2ns – 5s |
|
Record Length |
4K/channel |
|
Memory |
6 memory locations |
|
Trigger Mode |
Auto, Normal, Single |
|
Trigger Type |
Edge trigger |
|
Basic Performance |
|
|
Screen |
320×240 pixels (RGB), with LED backlight |
|
Communication |
USB, PC software |
|
Battery |
3.7V lithium polymer battery, 4Ah |
|
Operating Environment |
Temperature: 0℃ - 40℃ |
|
Humidity: ≤ 75% |
|
|
Storage Environment |
Temperature: -10℃ - 50℃ |
|
Humidity: ≤ 85% |
|
|
Operating Altitude |
0 - 2000m |
|
Size |
218mm × 118mm × 50mm ( including holster ) |
|
Weight |
700g |
|
Performance of multimeter |
|
|
Display |
6000 counts |
|
Input |
Max. Input Voltage: 600 Vrms CAT II, 300 Vrms CAT III |
|
Continuity Test |
Beeps at < 25Ω, in 600Ω range |
|
Diode Test |
If the voltage drop of the diode under test is more than 2V |
|
Capacitance Measurement |
6.000nF - 6mF |
|
Resistance Measurement |
600.0Ω - 60.00MΩ |
|
Voltage Measurement |
6.000V - 600V |
|
Waveform output performance |
|
|
Amplitude |
Output amplitude is adjustable. Output amplitude range: 0 - 2.5V Output amplitude accuracy: ± 2% for amplitudes < 2V ± 5% for amplitudes > 2V |
|
Frequency |
There is no frequency setup for dc output. Output frequency range: 26Hz - 50kHz Output frequency accuracy: ± 2% |
|
Specification of Scope |
|
|
Vertical System: channel of Scope |
|
|
Bandwidth (-3dB) |
50MHz |
|
Accuracy |
10mV/div to 20 mV/div: ± 5% full scale |
|
50mV/div to 5V/div: ± 3% full scale |
|
|
Vertical Offset Accuracy (DC) |
±0.2 div ±2mV ±0.5% offset value |
|
Trigger Sensitivity |
DC to 50 MHz: 0.8 div |
|
Horizontal System: time base of Scope |
|
|
Horizontal Sensitivity |
2ns/div - 5s/div, in 1-2-5 step |
|
Horizontal Accuracy |
< ( 0.01% + 1 pixel ) |
|
Specification of probe |
|
|
Rise Time |
X1 < 23.3ns |
|
X10 < 7.6ns |
|
|
Bandwidth |
X1 DC - 8MHz |
|
X10 DC - 50MHz |
|
|
Input Impedance |
X10 10MΩ (not including the Scope's input resistance 1MΩ) |
|
Input Capacitance |
X1 46pF ( not including the Scope's input capacitance ) |
|
X10 about 15pF |
|
|
Specification of Multimeter |
|||
|
Function |
Range |
Frequency, test current, or load voltage |
Condition: at calibration temperature±5℃, for 1 year |
|
Voltage |
|||
|
DC Voltage |
6.000V |
|
1.0 + 8 |
|
60.00V |
|
0.5 + 8 |
|
|
600.0V |
|
0.5 + 8 |
|
|
AC Voltage |
6.000V – 600.0V |
40Hz – 400Hz |
1.0 + 10 |
|
400Hz – 2kHz |
5.0 + 10 |
||
|
Resistance |
|||
|
|
600.0Ω |
|
1.0 + 5 |
|
|
6.000kΩ |
|
1.0 + 5 |
|
|
60.00kΩ |
|
1.0 + 5 |
|
|
600.0kΩ |
|
1.0 + 5 |
|
|
6.000MΩ |
|
1.0 + 5 |
|
|
60.00MΩ |
|
2.0 + 10 |
|
Capacitance |
|||
|
|
6.000nF |
|
3.0 + 8 |
|
|
60.00nF |
|
3.0 + 8 |
|
|
600.0nF |
|
3.0 + 8 |
|
|
6.000μF |
|
3.0 + 8 |
|
|
60.00μF |
|
3.0 + 8 |
|
|
600.0μF |
|
3.0 + 8 |
|
|
6.000mF |
|
3.0 + 8 |
|
|
|||
|
Continuity |
Buzzer beeps if the resistance is less then about 25Ω. |
||
|
Diode |
Buzzer beeps if the forward voltage drop of the diode is < 0.25V. |
||
You might also like
